 |
- NAT firewall, NAT ALG capabilities
- VPN Pass-through IP-Sec
- Single PPTP session support
- PPPoE/PPPoA client
- SNMP support
|
| ADSL/ATM Support : | ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready Rate Adaptive modem at 32 Kbps steps Dynamic Adaptive Equalization to improve Carrier's service area Bridge Tap Mitigation support ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) AAL ATM Attributes - AAL5 Support multiple WAN Connection (PVC) up to 8 Spectral compatibility with POTS F4 & F5 OAM Loopback/Send and Receive |
| EncapsulationSupport : |
RFC2684 Bridge and Routed LLC and VC Mux support
RFC2364 PPPoA Client support RFC2516 PPPoE Client support Transparent Bridge Support PAP/CHAP/MS-CHAP for Password Authentication Support |
| Network Support : |
Static IP support
Dynamic RIP routing support (with memory and firmware upgrade) IP/TCP/UDP/ICMP/ARP/RARP Application Support Network Address Translation (NAT) Port Mapping/Forwarding Easy setup of Port Forwarding rules for popular Games/Application NAT Application Level Gateway for popular applications DHCP Server/Relay/client DNS Relay Agent DMZ support PVC to VLAN Mapping Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support PPP Always on with configurable timeout PPP Dial on Demand Universal Plug and Play Support (UPnP) SNTP Support IGMP Support (v1 and v2) DDNS (Dynamic DNS) Support QoS Support (DSCP, TOS) PPP/DHCP Auto Detection |
| Security Support : |
NAT for basic Firewall support
Packet Filtering Firewall Support Stateful Packet Inspection Support Protection against Denial of Service attacks Password Authentication to Modem Two-Level Password protection |
|
Physical Specifications :
|
LED Indicators :
- 1 x "Power" (Green and Red) LED - 4 x Ethernet Link/Activity Status (Green) LED - 1 x "DSL" Link Status (Green) LED - 1 x "Internet" (Green and Red) LED External Connectors : - 1 x RJ-11 Telephone socket for ADSL line - 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx) - 1 x DC Jack for Power Input - 1 x Factory Default Reset Button - 1 x On/Off Power Switch Measurements : - Dimension : 156MM x 130MM x 29MM - Weight : Approx. 350 g |
| Power Requirements : |
Input Voltage : 9V DC +/- 10%
Input Current : 1.0A |
